|
The smooth, uniform surface of this opaque 20lb bond makes it the perfect choice for economical everyday plotting.
**Please note that 500 ft rolls will not fit on Designjet T1xxx T7xx Z3xxx Z21xx series printers. Please use 460 ft rolls for those machines**
92 Bright
2" core, imaging side out
36"x500' roll on 2" core. 2 rolls per box.
Physical Properties
Basis Weight 20lb / 75gsm
Caliper 3.8 mil
Opacity 84%
Sheffield Smoothness 96
Brightness 92
Operating Conditions
Comstoc
Inkjet Media works best in controlled operating conditions.
Recommended operating conditions are: Relative Humidity 20-70% and
Temperature 65-85°F. Dry time for your image will vary depending on
printer, ink volume and environmental conditions of your plotting area.
Storage Conditions
Always
store your Comstoc Inkjet Media in a cool dry area. It is best to keep
your storage conditions within the same guidelines as “Operating
Conditions” stated above. If your storage conditions are not similar to
operating conditions, we recommend that you allow the Comstoc Media to
acclimate to the operating conditions before commencing the printing
process.
Media Handling
Inkjet
printing should be done on the preferred side of your media. Preferred
side is always on the outside of the roll unless otherwise noted on
package. Be sure to handle Comstoc Inkjet Media from the edges. Do not
handle within the image area. Dirt and oils from your hands can cause
inks to repel, resulting in poor imaging. Always return unused media
to its original packaging.
Lamination
Over-laminates
can provide effective protection of your image from moisture and
limited protection from UV fading of the inks. Another reason to use a
laminate is to add or diminish gloss on your final image output. Both
hot and cold laminates are available with varying results. It is
important that your image be completely dry before laminating. Failure
to wait until the image is dry may cause your print to de-laminate in
time.
Archive Characteristics
Comstoc Inkjet Bond is derived from wood pulp base and is not considered archival.
|
National Azon 20lb CAD Bond (92 Bright) is compatible with the following products: |  | |
HP Designjet 4000 Printer (Q1273A)
HP Designjet 4000ps Printer (Q1274A)
HP Designjet 4020 42-in Printer (CM765A)
HP Designjet 4020ps 42-in Printer (CM766A)
HP Designjet 4500 Printer (Q1271A)
HP Designjet 4500mfp (Q1276A)
HP Designjet 4500ps Printer (Q1272A)
HP Designjet 4520 42-in Printer (CM767A)
HP Designjet 4520 HD Multifunction Printer (CM769A)
HP Designjet 4520ps 42-in Printer (CM768A)
HP Designjet 5000 Printer (C6090A)
HP Designjet 5000ps Printer (C6091A)
HP Designjet 5500 Printer (42 in) (Q1251A)
HP Designjet 5500 Printer (60 in) (Q1253A)
HP Designjet 5500PS Printer (42 in) (Q1252A)
HP Designjet 5500PS Printer (60 in) (Q1254A)
HP Designjet H35100 Commercial Printer (CH104A)
HP Designjet H35500 Commercial Printer (CH105A)
HP Designjet H45100 Commercial Printer (CH106A)
HP Designjet H45500 Commercial Printer (CH107A)
HP Designjet Z6100 42-in Printer (Q6651A)
HP Designjet Z6100 60-in Printer (Q6652A)
HP Designjet Z6100ps 42-in Printer (Q6653A)
HP Designjet Z6100ps 60-in Printer (Q6654A) |
|
